Campbell Hausfeld WX8019 Air Compressor Manual

The Campbell Hausfeld WX8019 is a versatile air compressor designed for a variety of tasks, including inflating tires, powering pneumatic tools, and more. This manual provides essential information on safety, features, installation, operation, and maintenance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

The WX8019 air compressor features a powerful motor, a durable tank, and multiple outlets for various applications.

Feature	Description
Powerful Motor	Delivers consistent performance for various tasks.
Durable Tank	Holds air efficiently for extended use.
Multiple Outlets	Allows for simultaneous use of multiple tools.
Portable Design	Easy to transport and store.
Pressure Gauge	Monitors air pressure for optimal performance.

Installation

Ensure the compressor is placed on a stable surface and connected to a power source.

Unpack the compressor and inspect for any damage.
Connect the air hose to the outlet.
Plug the compressor into a grounded outlet.
Ensure all connections are secure before operating.

WARNING! Always follow safety precautions when handling the compressor.

First-Time Setup

Power on the compressor and adjust the pressure settings as needed.

Set the desired pressure using the pressure regulator.
Check for any air leaks in the connections.
Test the compressor with a small task to ensure proper operation.

CAUTION! Do not exceed the maximum pressure rating.

Specifications

Model: WX8019
Power: 1.5 HP
Tank Capacity: 6 gallons
Max Pressure: 125 PSI
Weight: 45 lbs
Dimensions: 24 x 15 x 18 inches
Noise Level: 68 dBA

Controls and Settings

Familiarize yourself with the controls, including the power switch, pressure regulator, and outlet connections.

Important: Always check the pressure gauge before use.

Connecting Devices

Connect pneumatic tools using the appropriate fittings and hoses.

Ensure the compressor is turned off before connecting devices.
Match the hose fittings to the tool connections.
Turn on the compressor and adjust the pressure as needed.

Tip: Use quick-connect fittings for easy tool changes.

Operating the Compressor

Follow these steps to operate the compressor safely and effectively.

Turn on the compressor and allow it to build pressure.
Use the air supply for your tools as needed.
Monitor the pressure gauge during operation.
Turn off the compressor when finished.

WARNING! Do not operate the compressor in wet conditions.

Maintenance and Care

Regular maintenance ensures optimal performance and longevity of the compressor.

Check and change the oil as recommended.
Drain the tank regularly to prevent moisture buildup.
Inspect hoses and fittings for wear and tear.

CAUTION! Always unplug the compressor before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check power cord and outlet.
No air output	Blocked hose	Inspect and clear any blockages.
Excessive noise	Loose parts	Tighten any loose screws or fittings.
Pressure drops	Leak in the system	Check for leaks and repair as needed.

Service: For further assistance, contact customer support.