Campbell Hausfeld WL6703 Air Compressor Manual

The Campbell Hausfeld WL6703 is a versatile air compressor designed for various applications including inflating tires, powering pneumatic tools, and more. It features a 6-gallon tank, a maximum pressure of 125 PSI, and an oil-free pump for easy maintenance. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 6-gallon tank, oil-free pump, pressure gauge, quick coupler, and a sturdy handle for portability.

Feature	Description
6-Gallon Tank	Provides ample air storage for various tasks
Oil-Free Pump	Requires less maintenance and is easier to use
Maximum Pressure	125 PSI for optimal performance
Pressure Gauge	Allows for easy monitoring of air pressure
Quick Coupler	Facilitates easy connection of air tools
Portable Design	Includes a handle for easy transport

Installation

Unpack the compressor and inspect for any damage. Place it on a stable surface away from moisture.

Connect the air hose to the quick coupler.
Ensure the drain valve is closed before operation.
Plug the compressor into a grounded outlet.
Turn on the power switch to start the compressor.

WARNING! Always ensure the compressor is on a flat surface to prevent tipping.

First-Time Setup

Before using the compressor, follow these initial setup steps.

Check the oil level and ensure it is filled if applicable.
Set the desired pressure using the pressure regulator.
Test the compressor by connecting a tool and verifying operation.

CAUTION! Do not exceed the maximum pressure rating of the compressor.

Specifications

Tank Size: 6 gallons.
Maximum Pressure: 125 PSI.
Power Source: 120V AC.
Compressor Type: Oil-free.
Weight: Approximately 50 lbs.
Dimensions: 24 x 18 x 18 inches.
Noise Level: 68 dBA.

Controls and Settings

The compressor features a power switch, pressure regulator, and pressure gauge for easy operation.

Power Switch: Turns the compressor on and off.

Pressure Regulator: Adjusts the output pressure for connected tools.

Pressure Gauge: Displays the current air pressure in the tank.

Connecting Devices

Ensure the compressor is off before connecting any devices.

Attach the air hose to the quick coupler.
Connect your pneumatic tool to the other end of the hose.
Turn on the compressor and adjust the pressure as needed.

Tip: Always check for leaks in the connections before use.

Operating the Compressor

Follow these steps to operate the compressor effectively.

Turn on the power switch.
Allow the compressor to build pressure until it reaches the set level.
Use the connected tool as needed.
Turn off the compressor when finished.

WARNING! Do not operate the compressor in wet conditions.

Maintenance

Regular maintenance is essential for optimal performance.

Drain the tank regularly to prevent moisture buildup.
Check and replace the air filter as needed.
Inspect hoses and connections for wear and tear.

CAUTION! Always unplug the compressor before performing maintenance.

Safety Information

Read all safety instructions before operating the compressor.

Keep the compressor away from flammable materials.
Do not exceed the maximum pressure rating.
Always wear safety goggles when using pneumatic tools.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor does not start	No power	Check power source and connections.
Low pressure	Leak in hose	Inspect and replace damaged hoses.
Excessive noise	Loose parts	Tighten all screws and bolts.
Compressor cycles frequently	Improper pressure setting	Adjust pressure regulator.

Service: For further assistance, contact customer support.