Campbell Hausfeld WL6701 Air Compressor Manual

The Campbell Hausfeld WL6701 is a versatile air compressor designed for various tasks, including inflating tires, powering pneumatic tools, and more. This manual provides essential information on safety, features, installation, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Oil-free pump, 6-gallon tank, 125 PSI maximum pressure, quick-connect coupler, and a compact design for easy transport.

Feature	Description
Oil-free pump	Requires no maintenance and provides clean air.
6-gallon tank	Provides ample air storage for various tasks.
125 PSI maximum pressure	Suitable for a wide range of applications.
Quick-connect coupler	Allows for easy attachment of air tools.
Compact design	Easy to transport and store.

Installation

Unpack the compressor and inspect for any damage. Place it on a stable surface in a well-ventilated area.

Connect the air hose to the quick-connect coupler.
Ensure the drain valve is closed before operation.
Plug the compressor into a grounded outlet.

WARNING! Always ensure the compressor is on a flat surface to avoid tipping.

First-Time Setup

Power on the compressor and allow it to build pressure before using any air tools.

Set the pressure regulator to the desired PSI for your application.
Check for any air leaks in the connections.
Test the compressor by using it with an air tool.

CAUTION! Do not exceed the maximum pressure rating.

Specifications

Tank Size: 6 gallons.
Maximum Pressure: 125 PSI.
Power Source: 120V AC.
Weight: Approximately 50 lbs.
Noise Level: 68 dBA.
Air Delivery: 2.4 CFM at 90 PSI.

Controls and Settings

The compressor features a pressure regulator, on/off switch, and a gauge to monitor tank pressure.

Usage: Adjust the pressure regulator to set the desired output pressure for your tools.

Connecting Devices

Ensure the compressor is off before connecting any air tools.

Attach the air hose to the quick-connect coupler.
Connect your air tool to the other end of the hose.
Turn on the compressor and adjust the pressure as needed.

Tip: Always check connections for leaks before use.

Operating the Compressor

To operate, turn on the compressor and allow it to build pressure. Use the air tools as needed.

Monitor the pressure gauge during operation.
Turn off the compressor when finished.
Release any remaining air from the tank using the drain valve.

WARNING! Do not operate the compressor in wet conditions.

Maintenance

Regular maintenance is essential for optimal performance and longevity.

Check and tighten all connections regularly.
Drain the tank after each use to prevent moisture buildup.
Inspect the air filter and replace if necessary.

CAUTION! Always unplug the compressor before performing maintenance.

Safety Information

Always follow safety guidelines to prevent accidents and injuries.

Do not exceed the maximum pressure rating.
Keep the compressor away from flammable materials.
Use in a well-ventilated area.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor does not start	Power supply issue	Check the power cord and outlet.
Low pressure	Leak in hose or connections	Inspect and tighten connections; replace damaged hose.
Excessive noise	Loose parts	Tighten all screws and bolts.
Compressor cycles frequently	Improper pressure setting	Adjust the pressure regulator.

Service: For further assistance, contact customer support.