Campbell Hausfeld VT6367 Air Compressor Manual

The Campbell Hausfeld VT6367 is a powerful air compressor designed for both professional and home use. It features a 6-gallon tank, a maximum pressure of 125 PSI, and a 1.5 HP motor. This compressor is ideal for a variety of tasks including inflating tires, powering pneumatic tools, and more. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 6-gallon tank, 125 PSI maximum pressure, oil-free pump, and a durable design for long-lasting performance.

Feature	Description
6-Gallon Tank	Provides ample air storage for various tasks.
125 PSI Maximum Pressure	Allows for efficient operation of pneumatic tools.
Oil-Free Pump	Requires less maintenance and provides cleaner air.
Portable Design	Easy to transport with a handle and wheels.
Built-in Pressure Gauge	For easy monitoring of air pressure.

Installation

Unpack and inspect contents. Place the compressor on a stable surface.

Connect the air hose to the compressor outlet.
Ensure the drain valve is closed before operation.
Plug into a grounded outlet.

WARNING! Ensure the compressor is on a flat surface to avoid tipping.

First-Time Setup

Power on the compressor; allow it to build pressure.

Check all connections for leaks.
Set the desired pressure using the regulator.
Test the compressor with a pneumatic tool.

CAUTION! Do not exceed the maximum pressure rating.

Specifications

Tank Size: 6 gallons.
Maximum Pressure: 125 PSI.
Motor Power: 1.5 HP.
Weight: Approximately 50 lbs.
Dimensions: 24 x 18 x 18 inches.
Noise Level: 68 dBA.
Power Source: 120V AC.

Controls and Settings

Access the pressure regulator and on/off switch located on the front panel.

Pressure Regulator: Adjusts the output pressure for connected tools.

On/Off Switch: Powers the compressor on and off.

Connecting Devices

Connect pneumatic tools using the air hose.

Turn off the compressor before connecting tools.
Ensure the air hose is securely attached.
Turn on the compressor to begin operation.

Tip: Use quick-connect fittings for easy tool changes.

Operating the Compressor

Follow these steps to operate the compressor safely.

Turn on the compressor and allow it to reach the desired pressure.
Connect your pneumatic tool and adjust the pressure as needed.
Monitor the compressor during use for any unusual sounds.

WARNING! Do not operate the compressor in wet conditions.

Maintenance

Regular maintenance is essential for optimal performance.

Drain the tank after each use to prevent moisture buildup.
Check and replace the air filter as needed.
Inspect hoses and connections for wear and tear.

CAUTION! Always unplug the compressor before performing maintenance.

Safety Information

Read all safety instructions before operating the compressor.

Do not exceed the maximum pressure rating.
Keep the compressor away from flammable materials.
Use in a well-ventilated area.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check the power cord and outlet.
Low pressure	Leak in the system	Inspect hoses and connections for leaks.
Excessive noise	Worn components	Inspect for loose parts or damaged components.
Tank won't fill	Faulty pressure switch	Replace the pressure switch if necessary.

Service: For assistance, contact customer support at 1-800-543-6400.