Campbell Hausfeld VT6315 Air Compressor Manual

The Campbell Hausfeld VT6315 is a versatile air compressor designed for a variety of tasks, including inflating tires, powering pneumatic tools, and more. With a 3-gallon tank and a maximum pressure of 100 PSI, this compressor is ideal for both home and professional use. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 3-gallon tank, oil-free pump, pressure gauge, quick-connect coupler, and a compact design for easy storage.

Feature	Description
3-Gallon Tank	Provides sufficient air supply for various tasks
Oil-Free Pump	Requires no maintenance and reduces oil spills
Pressure Gauge	Allows for easy monitoring of air pressure
Quick-Connect Coupler	Facilitates easy attachment of air tools
Compact Design	Easy to store and transport

Installation

Unpack and inspect the compressor. Place it on a stable surface away from moisture.

Connect the air hose: Ensure the quick-connect coupler is securely attached.
Plug into a power outlet: Use a grounded outlet to prevent electrical hazards.
Check for leaks: Turn on the compressor and inspect for any air leaks.

WARNING! Always operate in a well-ventilated area to avoid inhaling exhaust fumes.

First-Time Setup

Power on the compressor; follow the setup instructions.

Set the desired pressure: Use the pressure gauge to adjust to the required PSI.
Test the compressor: Run it briefly to ensure proper operation.
Attach tools: Connect your pneumatic tools to the quick-connect coupler.

CAUTION! Ensure all connections are secure before operating.

Specifications

Tank Size: 3 gallons.
Max Pressure: 100 PSI.
Power Source: 120V AC.
Weight: 40 lbs.
Dimensions: 18 x 15 x 15 inches.
Noise Level: 68 dB.
Air Delivery: 2.4 CFM at 90 PSI.

Controls and Settings

Access the pressure settings via the pressure gauge. The on/off switch is located on the front panel.

Usage: Adjust the pressure according to the tool requirements and ensure the compressor is off before making adjustments.

Connecting Devices

Ensure the compressor is off before connecting any devices.

Attach the air hose to the quick-connect coupler.
Connect your pneumatic tool to the other end of the hose.
Turn on the compressor and set the desired pressure.

Tip: Always check for leaks after connecting devices.

Operating the Compressor

To operate the compressor, follow these steps:

Turn on the compressor using the on/off switch.
Adjust the pressure to the desired level using the pressure gauge.
Use your pneumatic tools as needed.

WARNING! Do not exceed the maximum pressure rating.

Maintenance

Regular maintenance is essential for optimal performance.

Drain the tank regularly to prevent moisture buildup.
Check the air filter and clean or replace as necessary.
Inspect hoses and connections for wear and tear.

CAUTION! Always unplug the compressor before performing maintenance.

Safety Information

Always follow safety guidelines when operating the compressor.

Wear appropriate personal protective equipment (PPE).
Keep the compressor away from flammable materials.
Do not operate in wet conditions.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check power cord and outlet.
No air pressure	Leak in hose	Inspect and replace damaged hoses.
Excessive noise	Loose components	Tighten screws and check for loose parts.
Pressure not building	Faulty pressure switch	Replace the pressure switch if necessary.

Service: For assistance, contact customer support at 1-800-543-6400 or visit www.campbellhausfeld.com.