Campbell Hausfeld IN633701AV Air Compressor Manual

The Campbell Hausfeld IN633701AV is a versatile air compressor designed for a variety of tasks including inflating tires, powering air tools, and more. This manual provides essential information on safety, features, installation, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating Instructions 8. Maintenance 9. Troubleshooting

Features at a Glance

Key components: Portable design, oil-free pump, built-in pressure gauge, and quick-connect coupler.

Feature	Description
Oil-free pump	Requires no maintenance and provides clean air.
Built-in pressure gauge	Allows for easy monitoring of air pressure.
Quick-connect coupler	Facilitates easy attachment of air tools.
Portable design	Lightweight and easy to transport.
Safety valve	Prevents over-pressurization.

Installation

Unpack the compressor and place it on a stable surface. Ensure adequate ventilation during operation.

Connect the air hose to the quick-connect coupler.
Plug the compressor into a grounded outlet.
Ensure the pressure switch is set to the desired PSI.

WARNING! Always operate in a well-ventilated area to avoid inhaling exhaust fumes.

First-Time Setup

Power on the compressor and allow it to build pressure before using any air tools.

Set the desired pressure using the pressure regulator.
Check for any air leaks before starting work.

CAUTION! Do not exceed the maximum pressure rating of your air tools.

Specifications

Model: IN633701AV.
Power Source: 120V AC.
Max Pressure: 125 PSI.
Tank Size: 3 gallons.
Weight: 30 lbs.
Air Delivery: 2.4 CFM at 90 PSI.
Noise Level: 68 dBA.

Controls and Settings

Access the pressure regulator and on/off switch located on the front panel. The pressure gauge displays the current tank pressure.

Tip: Always check the pressure gauge before using air tools.

Connecting Devices

Ensure the compressor is off before connecting any air tools.

Attach the air hose to the quick-connect coupler.
Connect your air tool to the other end of the hose.
Turn on the compressor and adjust the pressure as needed.

Tip: Use the appropriate fittings for your air tools.

Operating Instructions

To operate, turn on the compressor and allow it to reach the set pressure before using any tools.

Monitor the pressure gauge during operation.
Turn off the compressor when finished.

WARNING! Do not leave the compressor running unattended.

Maintenance

Regular maintenance is essential for optimal performance. Check for leaks and ensure the air filter is clean.

CAUTION! Unplug the compressor before performing any maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check the outlet and power cord.
Low pressure	Air leaks	Inspect hoses and connections for leaks.
Excessive noise	Loose parts	Tighten any loose screws or fittings.
Overheating	Blocked air intake	Ensure the air intake is clear of obstructions.

Service: For further assistance, contact Campbell Hausfeld customer service.