Campbell Hausfeld IN632700AV Air Compressor Manual

The Campbell Hausfeld IN632700AV is a versatile air compressor designed for a variety of tasks including inflating tires, powering air tools, and more. This manual provides essential information on safety, features, installation, operation, and maintenance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Oil-free pump, 6-gallon tank, 125 PSI maximum pressure, easy-to-read pressure gauge, and lightweight design for portability.

FeatureDescription
Oil-free pumpRequires no maintenance and provides clean air.
6-gallon tankOffers a good balance between portability and air storage.
125 PSI maximum pressureSuitable for a variety of inflation and power tasks.
Easy-to-read pressure gaugeAllows for quick monitoring of air pressure.
Lightweight designEasy to transport and store.

Installation

Unpack the compressor and inspect for any damage. Place the unit on a stable surface away from moisture.

  1. Connect the air hose to the compressor outlet.
  2. Ensure the power switch is in the OFF position before plugging in.
  3. Plug the compressor into a grounded outlet.
  4. Turn the power switch ON to start the compressor.

WARNING! Ensure the compressor is placed in a well-ventilated area to avoid overheating.

First-Time Setup

Before using the compressor for the first time, follow these steps:

  1. Check all connections for leaks.
  2. Set the desired pressure using the regulator.
  3. Test the compressor by inflating a tire or using an air tool.

CAUTION! Always wear safety goggles when operating the compressor.

Specifications

Controls and Settings

The compressor features a power switch, pressure regulator, and easy-to-read pressure gauge for monitoring air pressure.

Regulator: Adjusts the output pressure for different applications.

Connecting Devices

To connect devices, ensure the compressor is off and follow these steps:

  1. Attach the air hose to the compressor outlet.
  2. Connect the other end of the hose to the tool or device.
  3. Turn on the compressor and adjust the pressure as needed.

Tip: Always check for leaks after connecting devices.

Operating the Compressor

To operate the compressor:

  1. Turn on the power switch.
  2. Adjust the pressure regulator to the desired level.
  3. Use the compressor for your intended application.

WARNING! Do not exceed the maximum pressure rating.

Maintenance and Care

Regular maintenance is essential for optimal performance:

  1. Drain the tank after each use to prevent moisture buildup.
  2. Check and replace the air filter as needed.
  3. Inspect hoses and connections for wear and tear.

CAUTION! Always unplug the compressor before performing maintenance.

Troubleshooting

SymptomPossible CauseCorrective Action
Compressor won't startPower supply issueCheck the outlet and power cord.
Low pressureLeak in the systemInspect for leaks and tighten connections.
Excessive noiseWorn partsInspect and replace worn components.
Tank won't fillFaulty pressure switchCheck and replace the pressure switch if necessary.

Service: For further assistance, contact Campbell Hausfeld customer support.

Campbell Hausfeld IN632700AV Air Compressor Manual © - All Rights Reserved 2026