Campbell Hausfeld Air Compressor 110 Max PSI Manual

The Campbell Hausfeld Air Compressor is designed for a variety of tasks, providing a maximum pressure of 110 PSI. This versatile compressor is ideal for inflating tires, powering air tools, and other applications. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Portable design, easy-to-read pressure gauge, quick-connect air outlet, and a powerful motor.

Feature	Description
Portable Design	Lightweight and easy to transport
Pressure Gauge	Easy-to-read gauge for monitoring pressure
Quick-Connect Outlet	Allows for fast attachment of air tools
Powerful Motor	Delivers reliable performance for various tasks

Installation

Unpack the compressor and inspect for any damage. Place it on a stable surface away from moisture.

Connect the air hose to the quick-connect outlet.
Ensure the compressor is plugged into a grounded outlet.
Check the oil level (if applicable) before starting.
Turn on the compressor and allow it to build pressure.

WARNING! Ensure the compressor is on a flat surface to avoid tipping.

First-Time Setup

Power on the compressor and follow the instructions for setting the desired pressure.

Set the pressure regulator to the desired PSI.
Connect your air tool to the outlet.
Test the setup by activating the air tool.

CAUTION! Do not exceed the maximum PSI rating of your tools.

Specifications

Max Pressure: 110 PSI.
Tank Size: 1.5 gallons.
Power Source: 120V AC.
Weight: 30 lbs.
Noise Level: 68 dBA.
Air Delivery: 2.4 CFM at 90 PSI.

Controls and Settings

Access the pressure regulator and on/off switch located on the front panel. The pressure gauge displays the current PSI level.

Safety Features: Automatic shut-off when the desired pressure is reached.

Connecting Devices

Ensure the compressor is off before connecting any devices.

Attach the air hose to the quick-connect outlet.
Connect your air tool to the other end of the hose.
Turn on the compressor and set the desired pressure.

Tip: Always check for leaks before use.

Operating the Compressor

To operate, simply turn on the compressor and adjust the pressure as needed for your application.

Monitor the pressure gauge during operation.
Adjust the regulator to maintain desired pressure.
Turn off the compressor when finished.

WARNING! Do not operate in wet conditions.

Maintenance

Regular maintenance is essential for optimal performance.

Check and change the oil (if applicable) regularly.
Drain the tank to remove moisture.
Inspect hoses and connections for wear.

CAUTION! Always unplug before performing maintenance.

Safety Information

Read all safety instructions before operating the compressor. Always wear safety goggles and ear protection.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check power cord and outlet.
Low pressure	Leak in hose	Inspect and replace damaged hose.
Excessive noise	Loose parts	Tighten all screws and bolts.
Overheating	Blocked air intake	Clear any obstructions.

Reset: Unplug and plug back in to reset the compressor.